钛白粉

据据对于效果要求的不同，涂料产品分为亚光、半亚光、三分亚、七分亚、亮光、高亮光，高光漆顾名思义钛白粉就是涂刷后会有非常亮效果的涂料。
According to the requirements of the different effect, paint products are divided into sub light, semi Matt, three points, seven points, the light of Asia, Gao Liangguang, high gloss paint as the name suggests is the besmear after there will be very b钛白粉right effect coating.
管很多施工人员使用的高光漆无论是 还是产品都是非常优秀的，但是仍然会出现高光漆不显其光泽的问题。据业内专家分析，主要以下由于四点原因， ，施工过程中涂装表面温度过大；第二，涂装表面过于疏松；第三，涂装表面不洁净，有油脂存在；第四，喷涂过程中有干喷。
Many construction workers using a high gloss paint both brands or products are very good, but there will still be a high gloss paint does not show its luster problem. According to the expert analysis, mainly because of four reasons as follows, first, excessive coating the surface temperature in the process of construction; second, coating surface is too loose; third, coating the surface is not clean, grease; fourth, the spraying process dry spray.
针对施工问题，专家给出了几点解决方案。首先，保持施工环境，确定适当的湿度下进行涂装；第二，要确定涂装表面的洁净；第三，使用合适的底漆封固基底；第四，喷涂时注意气压及喷枪与基底的距离，周围做好挡板。
According to the construction problems, experts are given some solutions. First, keep the construction environment, the coating to determine the proper humidity; second, to determine the coating surface clean; third, using a primer seal suitable solid base; fourth, spraying pressure and spray gun and attention the basal distance, around to baffle.
施工人员如将以上几点 做到，相信高光涂料自会散发出耀眼的光泽。
Construction personnel such as these do, believe that high optical coatings will emit bright luster.

关键词：金红石型钛白粉